AirConception Nitro 200 Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame The standard mounting location is over…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Mounting bracket for the power switch on an AirConception Delta Paramotor Frame
The standard mounting location is over top of the left shoulder which is almost impossible to reach while wearing the ParaMotor.
Includes hole for optional LED & LED Mounting sleeve.
Design includes 2 brackets that can be inserted into the switch holes, which prevents accidental flipping of the switch.
Video of installation
Tested with PETG print.
Wiring diagram for nitro 200 designed by woundedknee
https://www.thingiverse.com/thing:2723893/comments
LCD Version
DeltaSwitchLCD.stl uses these voltage readouts from amazon instead of an LED
If using the LCD version, I highly recommend replacing the wire with silicone wire (less likely to break from vibration/soldering). Also be sure to calibrate the potentiometer and then lock it into place with hot glue/ liquid electrical tape so it doesn't recalibrate from vibration.
Print instructions
Category: Sport & Outdoors