OpenScan Benchy - Revopoint Pop2 by Nodge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
raw and aligned scan of the OpenScan Benchy (45mm)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/
We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out if you want to participate with your 3D scanner!
> One of them is titled oneclick which is basically the software choosing the best post processing
method for the scan and the second one is the scan i have post processed myself to 0.1mm fusion which i think came out better.
>> I did need to use scanning spray as there would have been no chance to scan otherwise.
>> The one click scan took 1minute and 54 seconds to scan and 40 seconds to post process which was to 0.2mm fusion.
>> The 0.1mm fusion scan took 1 minute 13 seconds to scan then to fuse it took 43 seconds then another 30 seconds to produce the mesh.