Qidi Q1 Pro Cartographer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Cartographer3d eddy probe.
- Ocena
- 4,75 / 5
- Polubienia
- 34
- Pobrania
- 175
- Wydruki
- 3
- Wyświetlenia
- 2231
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mount for the Cartographer3d eddy probe. I used the standard probe but the right angle model would probably fit better.
The original inductive probe mount location and hardware is used.
two M3x5x4 heat set inserts are used for mounting the probe.
The probe offsets are x 15.7 and y 18.3
Supports are required, I printed in ABS to withstand the chamber heat.
I never used cartographer with the stock qidi firmware. With openq1 and freedi, installation basically followed the cartographer documentation.
The following link may help with stock firmware but I have not personally tested. https://github.com/keyboardspecialist/q1pro_beacon
******PLEASE NOTE******
There is interference with the nozzle wiper. I can't speak to all machines but I backed off the x and y values appropriately as to not collide with the wiper arm at the back. Please adjust your parameters.