Generic Screw Driver and Bits - Gridfinity 3x1-4u
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Generic Screw Driver and Bits Holder - GridfinityThis is a simple screw driver and bits holder for generic low…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Generic Screw Driver and Bits Holder - Gridfinity This is a simple screw driver and bits holder for generic low cost tools you can find at dollar stores and similar. This design is meant to be compact for low height desk drawers and so all the bits are at an angle inside of the holder but still visible for too see the bit. The dimensions of the screws are standard 4mm hex bits at 30mm length
Dimensions for the screw driver base are 85mm x 14mm (handle) and 20mm x 8mm (screw bit socket).
Gridfinity height is ~4u and base has slots for magnets
0.4mm nozzle 0.20mm layer height 2 walls 15% infill No supports Brim optional (helps sometimes - gridfinity bases sometimes do that)
To change sizes, feel free to remix from Tinkercad here: https://www.tinkercad.com/things/g66tON1aDRd-screw-driver-gridfinity
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu P1S
Doesn't Matter
Supports:
No
0.2mm
Infill:
15%
Category: Tool Holders & Boxes