Enclosure for 3.5inch Cheap Yellow Display V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compared to V1, the new model exhibits a more smooth front surface (no screws visible)
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 659
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my V2 enclosure for the 3.5inch Cheap Yellow Display.
Included are stands for perpendicular (90°) and tilted (105°) setups.
The lid_solid.stl contains only an opening to access reset and boot buttons. lid.stl contains openings in order to access the sockets and for cooling (until now, I am not sure that this nessary…).
The panel can now be mounted with 4 self tapping screws M3x5 (not longer). To mount the lid 4 self tapping screws (M3x6) are required.
There was a problem with file upload. So I tried to upload missing files after publishing again. But there seems to be still a problem with the lid.stl. You can download it from the V1 page (link below).