Tunnel and Walls for H0 scale Modelrailway
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tunnel and Walls for H0 scale Model-Railway combinable to arcades. WIP
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 884
- Wydruki
- 2
- Wyświetlenia
- 2414
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
WIP!
As per special request by my dad, I am designing a fully modular tunnel system.
The first modules are ready for everybody to test.
More modules will follow, including pillars in various angles, shorter segments of wall as well as slanted pieces to remodel a tunnel entrance found in mountaines regions in Germany and Europe.
The scale is almost H0 with compromises to printability, e.g. the brick sice.
It is a loose represantion of the real world counterparts with functionallity and looks in focus.
Please feel free to test and give feedback, once the project is finalized the license will be changed to a more open one.
I highly recommand to print this with a 0.2mm nozzle and at least ‘mouse ears’ for better bed adhesion. Walls and Top/Bottom layers doesn't matter that much but please use a 0.1mm layer height, because i modeld the brickwork with 3 different hights, some bricks have a +- 0.1mm offset.
Please note that this is made for modelers, there might be gaps and misalignments and post processing is definitely required. But as you can see in the pictures from my dad's builds it is worth it (at least in his and my opinion).
Changelog
15.06.:
- Changed open tunnel to v1.1, some polishing done
- added pillars 45 and 90 inward and outward
16.06.:
- pillars 45 and 90 in/out, polished for easier printability
- added half and quarter lenght brickwall