Pimoroni Automation HAT for Raspberry Pi CAD Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CAD files to allow you to include the Pimoroni Automation HAT for Raspberry Pi in your designs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Fusion360 .f3d and STEP files of the Pimoroni Automation HAT (https://shop.pimoroni.com/products/automation-hat?variant=30712316554).
I grabbed their image of the front side of the board to put a decal on it but that can be easily removed if you want to.
The topside components are definitely not exact sizes, and I've increased the size of the header underneath the board to ensure clearance for a male header and cable end if needed. You should alter the vertical height of that header if you're plugging it directly into the RPi header.
The most important things, the dimensions of the board and the hole locations, should be correct. The boards themselves have irregular edges where they were cut from a larger PCB so you could make allowances for that.