customizable Filament Swatch set holder (<50g) tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
light filament card holder for the wall and desk for 21 cards. Filament tag for temporary labelling of individual cards
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I recommend printing without support, your printer should be able to handle the bridging.
I have constructed a beautiful holder for the filament cards that I have remixed, which holds 21 cards.
It displays the different cards nicely and can be used both on the wall and lying flat.
Also included is a wall holder with screw holes, but I simply used double-sided Gekko tape, which also works very reliably. There is also a small labelling card for the wall bracket.
Last but not least, I have also drawn a tag which can be snapped onto a filament card, I use it to mark which filament is currently in the AMS or which filament was last in the printer, so that I know whether there could be PETG residues before the next print with PLA, for example.
You can also use the tags to divide different filament groups, for example, and then label the tag in the slicer.
you can find the filament cards here :)
https://www.printables.com/model/1138522-remix-of-the-filament-swatch-card-with-label
If you are interested, I can also make a card that serves as a divider, just write it in the comments, I just printed several cardholders to divide ;)
Have fun collecting it's addictive !!!