Framework 13 Display Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turns a Framework 13 display into a portable monitor
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turns your extra Framework 13 display into a working portable monitor
I tested on the matte display, it will probably work on the original, but I am not sure if the board works on the 2.5k. - Please let me know if you know that it works.
This design requires only the board, monitor, EDP cable, and screwdriver. To connect it you need a DP alt mode USB-C cable, or a Thunderbolt 3 or better cable.
For the top, you need 3 small screws, and the bottom uses 2 big screws
To mount, the base feet are for flat surfaces, and the hook ones are for mounting on top of the laptop, good for small spaces
Control board - https://www.aliexpress.us/item/3256805297147520.html (with cable)
Printer - Elegoo Neptune 4 Max (needs a printer with a bed size larger than 301mm)
Supports - Only the back needs supports
Filament - I used SUNLU PLA, neither the board nor the display gets hot