1 / 2
BTT Hdmi7 v1.2 Case to Phone Arm Adapter — zdjęcie 1
1 / 2

BTT Hdmi7 v1.2 Case to Phone Arm Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for connecting Flexible Sturdy Phone Arm System and Voron BTT Hdmi7 v1.2 Case

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
147
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This model is a way to mount this BTT HDMI 7 1.2 mount with holes on the back side by tiwipewo on the Flexible & sturdy phone arm (100% Printed) by FunkyArt.

I think this counts as an original model, not 100% sure. All links are NOT affiliate links

The adapter plate needs 4 pairs of M4x14mm bolts and nuts to attach to the case. I did design for M4 heatset inserts but then realized I didn't have any, oops. 

To connect the arm connector, 4 M3x14 or M3x12 screws are needed. I sized the holes for these inserts Yaocom 300 Pcs M3 Heat Inserts M3 x 4mm x 5mm Brass Threaded Inserts.

I split the design into two parts for ease of printing and cause of layer line orientation. 

Printed with 40% infill with Sunlu High Speed PLA White and it seems sturdy enough.

 

I have also included the FreeCAD file for anyone who wants to make adjustments for various heat insert hole sizes.

 

Tagi