1 / 7
15mm Tape Dispenser — zdjęcie 1
1 / 7

15mm Tape Dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had some 15mm Kapton tape which was rattling around on my sellotape dispenser so I put together this simple solution.

Ocena
0 / 5
Polubienia
4
Pobrania
33
Wydruki
0
Wyświetlenia
230
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

A simple tape dispenser with a spacer to fit 15mm width tape rolls.

This should prevent it from rattling around whilst dispensing.

Fits my Rapesco tape dispenser perfectly but will hopefully fit most generic desktop tape dispensers.

I initially designed this as one part but split into two for ease of printing without too much support material. Note that you will still need to print with supports, for both parts - I found organic supports work really well.

The rectangular/centrepiece part should then slot into the slot in the wheel. Your tolerances might be different but I ended up using a -0.3mm tolerance for a tight fit that didn't require too much force to get into place.

Could probably be improved by chamfering the two parts that connect for ease of insertion.

Tagi