Electronic drumkit cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super sturdy electronic drumkit rail-mount cup or bottle holder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Super sturdy electronic drumkit rail-mount cup or bottle holder, mounts with 2x M6x20 screws and 2x M6 nuts.
Based off of @SaddamCZ's great bracket design from https://www.printables.com/model/12950-two-part-drumstick-holder-6-8-drumsticks (great model in general). The cup holder portion is large enough to fit most cylindrical 32oz/1L water bottles or large cups, and also includes an insert for cans or water bottles. Also has a small air hole at the bottom to make getting tight fits in and out easy. Has held up admirably through blast beats.
Bracket and insert can print face-down with no supports, cup holder portion prints upright with supports (recommend tree supports for easier removal unless your grid supports are really dialed in). I printed this with PLA, just be careful not to over-tighten the bracket.