Small Guard for Remington Vacuum Beard & Stubble Trimmer 6000 (MB6850A-AT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a smaller (~size 1/2) guard for the Remington Vacuum Beard & Stubble Trimmer 6000
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Edit 2025-03-08: After a few weeks I decided I wanted a closer shave so I've added a version 2 (V2) that shortens the tines, adds more tines, and moves them closer to the blade. It also rounds the face-interface and adds a thumb-push to make it easier to remove, and improves the clearances. I'll leave the original up but in my opinion, V2 is a big improvement. I also rotated it 90 degrees in PrusaSlicer when printing and elevated it off the print bed to get more consistent supports. I've included the _prusaslicer.3mf version for that, as well.
Original: I wanted a closer trim for my stubble than the stock guard that came with the Remington Vacuum Beard & Stubble Trimmer 6000 (MB6850A-AT), so I made this. The stock's closest trim is ~2.8mm and this is ~1.5mm.
Printed in PLA at 0.20mm SPEED with gyroid infill.