1 / 8
Gearbox with a gear ratio of 1 to 17 billion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gearbox remix with a gear ratio of 1:65000
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 1260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
1:65000 Gearbox Remix
This is a remix of the 1:65000 gearbox project from 3D PRINTER ACADEMY
Project Link
Here, you can find 3D-printed shafts, spacer bushings, and a base with adjustable dimensions, allowing you to install a varying number of gears—from a minimum of 2 to a maximum of 18.
⚙ Gears must be purchased from the original project page or modeled manually.
Printing Requirements for a Complete Build:
✅ 18 gears
✅ 1 base (including the main base and a movable wall)
✅ 2 shafts (recommended: 8mm metal shafts)
✅ A required number of spacer bushings
Print Settings:
- Nozzle: 0.4 mm
- Perimeters: 5
- Top & Bottom Layers: 6
- Infill: 15% Gyroid
- Filament: ELEGOO PETG PRO