18x18x10cm Burried Removable Water Dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A water dish/pool for any terrarium with deep substrate. It is two parts, a base and a removable water dish.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
PRINT THIS IN PETG, OR AN EVEN MORE STABLE PLASTIC
It's up to you to decide if you want to take the risk of using a printed feature in your pet's environment. This is in theory safe, and I've had happy salamanders using it for over a year, but its not on me if this is a hazard for your tank.
The base has a hole for drainage, since the water will slowly leak from the bowl even with the strictest of print settings. You will want to cover this hole with mesh of some kind to prevent critters from getting into your drainage layer.
The tub has two tabs on the top to make removal for cleaning easy. It also has a nice rock pattern so critters have something to climb out of the relatively deep tub. It should be printed with at the very least 6 walls and 10 top and bottom layers, with an infill pattern like gyroid or lightning to allow any water that gets in to drain out easily. The tub will need supports.