1 / 5
Spool for Formfutura ReFill Filament
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
clip-on spool for Formfutura ReFill filament utialising a bayonet-type coupling mechanism for easy use.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
This Spool consists of two pieces, that have to be stuck onto Formfutura ReFill filament. The Design relies on the cardboard core of the Filament to stay intact.
The Assembled Spool is small enough, to fit inside the bag the filament came in.
(the added pictures do not depict an older revision of the model)
USER MANUAL:
- Print the Model twice
- Lay the Filament onto the Part with the four little sticky-uppy-bits touching the inside walls of the cardboard spool core.
Align the velcro straps with the cutouts meant for them. - Open the velcro straps gently, and pull them out.
- Insert the second half and turn it into position, so that the Spool can not fall apart.
- Start printing!