Creality Falcon 5w Honeycomb Laser Bed Line Up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic Foot attachments to help line up the Honeycomb Laser Bed to the Falcon Chasis for easier Laser Engraves/Cuts
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 444
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was a personal design but it might come in handy. it is in no way 100% accrurate but rather guide to put the workbench up against to make calibration easier.
there are 2 models for the lower right and left legs simply print them and slip them on to the legs.
Feel free to adjust these models and remix to make them more accurate.
Note this was designed for the 500 * 500mm Two Trees Honeycomb Laser Bed i bought off amazon.
I am un aware if there are differences in actual size or shape of other Honeycomb Laser Beds.
Printed using ESUN PLA+ on Anycubric kobra 3 and Anker make with the default PLA settings on each
