DragonBurner ProtoXtruder Carriage and EBB36 mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a remix of the MGN12H Carriage Lugs and EBB36 mount from chirpy2605's DragonBurner repo to accommodate protoXtruder
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I love chirpy2605's dragonburner, i also love nhchiu's protoxtruder, i also love running just 4 wires to the toolhead. unfortunately, the carriage lugs and the ebb36 mount from the dragonburner repo does not have matching holes that align with protoXtruder1 so i remixed the carriage and the the mount as i am currently going to use them on my printer.
The lugs went a bit low to clear some space for the 22mm motor so a flat support (machinist square) on the bottom of the carriage might be needed when installing the heat set inserts so it does not deform.
As for the ebb36 mount, i used the 21mm standoffs from the packaging and the bottom holes sits flush with the lugs for better rigidity.
Suggested print settings: 0.2mm layer height, 0.45mm line width, 30-40% infill.
Step files included so you can modify it to suit your needs.
