Perlator/Aerator Tool with space for logos
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tool handy when changing the aerator of M14/24mm diameter faucets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A simple tool handy when changing the aerator of M14/24mm diameter faucets.
The tool features an additional flat surface where logos or writing can be added.
This can be done either by using the provided FreeCAD source or directly in e.g. PrusaSlicer.
When printing, PLA works well because of its comparatively high rigidity. It's also advisable to increase the perimeter-count for the contact surfaces.
The 3mf demonstrates how to add a logo and a selective perimeter increase with the openbuilds-button from here.
I used 0.3mm layers and ironing on the top surfaces, but you should adjust that to your liking.