1 / 2
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 4 Toolheads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 4 Toolheads
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (32)Powiązane
LDO Nitehawk Umbilical Exhaust Plate for Voron 2.4 - 4 Toolheads
I modified this for a Stealthchanger with 4 toolheads (still working on it)
Print off the original PG7 blocks (add a little lubricant in the tracks for ease)
Hardware: 5 M3 x 8mm screws (do not over tighten)