1 / 3
PRUSA MMU3 collet holder for 3 connector types — zdjęcie 1
1 / 3

PRUSA MMU3 collet holder for 3 connector types

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

to let MMU3 back ptfe holder (collet holder) support 3 different types of connectors: 6mm collet, ECAS, PC4_M6

Ocena
5 / 5
Polubienia
16
Pobrania
126
Wydruki
1
Wyświetlenia
351
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

replace the original Prusa MMU3 part mmu3-collet-holder-r4.stl

in case you want to use some different PTFE tube connectors for prusa MMU3.

Can choose : PC4M6,  ECAS, 6mm collet.

For ECAS , must remove the outer black rubber part, the hole is too small for PTFE tube to pass through.

Fusion360 source file provided.

Step file provided.

 

I think push the PTFE tube all all all the way in to reach the very end to reach the large base body is the correct way, so it's easier to load filament into MMU.

 

print setting: 

infill 20% + ,  3+ perimeters , no support,  consider adding brim if bed adhesive is not enough.

Already in correct print orientation.

must enable External perimeter first slicer setting to achieve best dimensional accuracy

Prusa Slicer - Layers and Perimeter - near GUI bottom , External perimeter first.

So we can easily hand press install the ECAS and 6mm collet.

For PC6M4 may need to use pillars tool to turn it in, at least for the first time.

mount screw 2XM3 10mm (same as original part)

 

 

Updated 2025 March 05 to make PC4M6 threads better for easily hand turn.