Rlaarlo Omni Terminator Wheelie Wheel Center
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cylindrical wheel that slides onto the center portion of the wheelie bar on the Rlaarlo Omni Terminator
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I've had some trouble with the wheelie bar on the Omni Terminator. I've been bashing it pretty hard and it consistently results in the wheelie bar screws bending (the screws that hold the wheels onto the bar, M3X30). This design fits over the center of the wheelie bar shaft and is an addition to the stock wheelie bar setup. It sits slightly proud of the stock wheels, taking the brunt of the impact when rolling over. I haven't had a problem with bent screws since installing the additional wheel. Printed in PLA+ at 20% infill and it's held up through 5+ hours of abuse. Your mileage may vary.
