1 / 3
Cobra Microtalk Radio Clip - Carabiner Compatible
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip for the Cobra microTalk radio with a larger clip & also provide a loop for carabiners / other attachments.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Included is some gcode used to print, 2 STLs one with & one without the signature & a step file as well.
Recommeded settings are:
- 0.2mm layer height
- Print with supports - organic on the baseplate
- Print using PETG
- Use 50% infill, honeycomb - using a higher infill percentage to give the part a bit more strength
