FCS II Fin tabs (FCS 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic model of FCS II fin tabs so you can design your own compatible fins more easily.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A basic model of the FCS II (FCS 2) system fin plugs. I have used this in my own models when printing and trialling fins for my surfboard.
This model is simplified to help with easy printing. One side will have an unavoidable bridge if you print it on its side. Keeping these surfaces flat and sharp helped the lock engage with the fin better than with a chamfer but after a few removals the plastic will deform and it wont be help in as well.
Mainly have fun and experiment! Printing fins has been fun so enjoy and share your designs too.
A good way to start designing your own fin is with a correctly scaled reference image or tracing.