1 / 4
PWM Fan Control Board Enclosure for Radiator Efficiency — zdjęcie 1
1 / 4

PWM Fan Control Board Enclosure for Radiator Efficiency

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 3D-printed enclosure is designed for a PWM fan control board from Aliexpress.

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This enclosure is designed specifically for the PWM fan control board. In addition, I have included an adapter for the temperature sensor, which fits onto the radiator valve for accurate temperature readings.

The fans are mounted underneath the radiator, and the PWM board controls both the fan speed and activation based on the temperature sensor’s input. This setup helps improve heating efficiency.

You need to desolder the pre-soldered power supply wires from the back and solder them to the front side.

I first soldered the 5.5 x 2.1 mm round connector and then secured it in the circular opening with a drop of glue.

I have been using this setup for the second heating season now and have expanded the system to all radiators.

Link to Parts:

The board requires a "blackhead probe" to fit into the adapter for the radiator valve