1 / 2
Locking screw for AzureFilm Master Spool BMW 1000m Wheel Style — zdjęcie 1
1 / 2

Locking screw for AzureFilm Master Spool BMW 1000m Wheel Style

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Locking screw for AzureFilm Master Spool BMW 1000m Wheel Style model

Ocena
4,5 / 5
Polubienia
10
Pobrania
52
Wydruki
2
Wyświetlenia
190
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

I made an locking screw for AzureFilm Master Spool BMW 1000m Wheel Style model. This locking screw adds additional safety, preventing sides of the spool to disassemble. It is designed to fit on over the standard Prusa mk3s spool holder.

In the design I accounted for the thread clearances, but depending on your print settings you may encounter that the threads are binding. If it is binding, use some force to screw on and off for a few times and it will get better. 
You can also use a file or sandpaper to clear a threads a bit. :) 

 

Tagi