1 / 5
Tesla Model 3 Highland(2024) Dashboard Phone Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable dashboard phone holder.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 271
- Wydruki
- 0
- Wyświetlenia
- 1429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
Modified based on windo.ac's design, the width is increased to 50mm.
Only one single piece is sufficient to support the phone.
An upper clamp is added to secure the phone, with an adjustable width range of 60mm to 86mm.
The adjustment lock and the stand can be printed together.
Requiring no additional parts—all components are 3D printed.
If additional grip is needed, a small piece of rubber can be attached to the inner side.
Layer height: 0.2mm, nozzle width: 0.4mm.
Do not use PLA,Requires UV-resistant materials such as PETG.
