1 / 5
Handle bar for sliding door of CHAUSSON Camper Van
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle bar for sliding door of CHAUSSON Camper Van
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
This handle bar was made for the sliding door of a Chausson Van as mentioned on the pic.
There is no ex work handle bar to close the door from inside so we designed this stable bar to be mounted with to screws that are already in use to hold the inner shroud with windows of the sliding door.
The space between the screw holes is 302mm.
We also added a little washer disc to be placed below the handle bar to balance the screw hole depth a little better.
Material: PETG
Layerheight: 0.2mm
Infill: 30% (Gyroid)
Supports: No