Low profile Philips TV feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile feet for Philips TV. Works perfectly with my Philips 49 inch LED 49PFT4132. You will need a total of 4 M4…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 1905
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Low profile feet for Philips TV.
Works perfectly with my Philips 49 inch LED 49PFT4132.
You will need a total of 4 M4 screws and 2 prints of this model.
Please note: this print will support your quite expensive TV. It is smaller than original version and may cause your TV to fall and break. I take no responsibility for that - use at your own risk!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.2mm
Infill:
50% for lower half, 100% for upper half
Filament:
Prusament PETG Jet Black
Notes:
Remember - this part will support a heavy TV, ensure it is rigid enough by standing on it first.
Mine worked well with the above settings.
Category: Replacement Parts