4080u nema 23 motor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts a Nema 23 motor to 4080U linear actuator
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this to properly space and support a nema 23 stepper on top of a 4080U linear motion unit from Amazon.
https://a.co/d/iyIKNiq
Coupler used was this anti-backlash “lovejoy” style connector.
https://a.co/d/0nqUxjk
Printed from Rakine PC on my Prusa XL at .15mm LH, .4mm nozzle, 4 walls, 50% triangular infill.
Very sturdy, with access to the coupler from the back. It handles the full torque of these steppers without any deflection:
https://a.co/d/0D3KVjl
The rear threads are sized for m4 thread clearance, and hold the Spacer and motor to the u-frame cap. The front stepper mount threads are sized to accommodate easy self-threading with the same m4 threads. Counterbored holes behind the spindle are also sized for clearance.