Kindle Scribe reading case cropped for Prusa MK4/S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the Kindle Scribe to better hold onto it while reading, especially on your back. - cropped to the MK4 print bed
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Original description:
This case will help you hold on to your Kindle Scribe while you read. You can hold it in any orientation, including face down, and the case will keep grip while giving you finger loops to hold onto the Kindle. Case can be printed in PLA. Be sure to print the spacers in TPU, this will help to prevent the reader from rattling around in the case. The TPU spacers clip onto the ribbing between the Kindle and the case.
To insert or remove the Kindle from the case, slightly bend back the corners of the case on the long arm side and pop the Kindle in or out.
Print the case flat on it's back and use some supports for the overhangs.
I just modified the 3d model to fit on the Prusa MK4/S print bed.