Ideaformer IR3 v1 Metal Belt extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extrusion extensions to fit the larger IR3 v2 belt to the v1
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 2
- Wyświetlenia
- 166
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to retrofit the new IR3 v2 Metal Pei belt to my IR3 v1
The intention is to reuse the factory roller and tensioning system, along with the metal roller guide plates and fasteners. (pictures are from my 1st test part, I have since added V-slots for factory front scraper plate and shortened the model so the guide plates fit)
Printed my test pieces from pla and they seem fine so far but ymmv, print with what you like.
Would recommend at least 1.6mm wall thickness, 15% infill, and 4-6 top/bottom layers (@0.2 LH) for minimum strength. feel free to go crazy though adding more.
Additional Hardware Needed:
(For bolting extensions in place of factory guide plates)
M4x25mm - 8pcs
M4 nuts - 8pcs
M4 washer - 8 pcs
(For bolting the factory tensioner caps)
M5 Heatset insert - 4 pcs