Ender 3 Filament Guide Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Iconic filament guide primarily designed for Ender 3, but can be adapted for other printers as well.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a distinguishing filament guide that gives your 3D printer a nice extra touch, while being practical.
The filament goes through the chimney, passes the window and out of the hole in the back. I tried to maintain the iconic Benchy as far as possible. The only significant add-on is the block under the Benchy to slide it on the extruder block, as you can see in the images. If you don't think it's fastened enough, you can add a bit of double-sided tape, but it worked well for me and I wanted to prioritize simple attachment over some complicated thing with screws.
Printing
It's a fairly simple print. The trickiest part is the gap made to slide the boat on the extruder. You will need to enable supports for that part, but the two holes on the bottom make it possible to have supports on the build plate only, if you use organic supports. It could be a little tricky to remove, but in the end, the Benchy is a 3D printer torture test, so what would it be without some challenge?
Printer Ender 3 (NEO)
Material eSun PLA matte
Supports Yes (organic, on build plate only)
Slicing Profile PrusaSlicer Ender 3 NEO, 0.24mm layer height