Steamboat Willie Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mashed-up Benchy and Steamboat Willie!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
There are two options…
Option 1: Steamboat with Funnels - Single colour print (Paddles printed separately).
Option 2: Steamboat without Funnels - Print the Funnels separately in black!
Printing
The Steamboat does not require supports.
This model was tested using PLA, printed at 30% infill.
Default size is 25mmW x 105mmL x 44mmH (inc Funnels)
The hull can be printed in two colours by pausing and changing the filament at approx 6mm height.
Assembly
To attach the paddles, straighten out a regular sized paper-clip and cut (or bend repeatedly) to a length of about 65mm.
Thread the wire through the paddles (keeping the axle stand-outs against the hull) at each side of the boat.
Carefully, bend the wires back into the paddles - as shown.
Enjoy!
The steamboat paddles rotate together when Steamboat Benchy is pushed along a rough surface - such as a carpet!
CONTAINS SMALL PARTS - NOT A TOY!