5mm beveled pin for Minimized Cable Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Testing if a beveled pin in secv's Minimized Cable Winder would work fine anyway.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is the 5mm pin from secv's Minimized Cable Winder just edited to have a little bevel on the edges that are in direct contact with the cable.
The idea is that “less edgy” edges would lower the risk of damaging the cable with constant use. The original design is very compact and this comes at the cost of tight winding so this might be one approach to mitigate one downside of an otherwise excellent design.
Once printed I thought that I could have been bolder with the bevel depth.
This is just the 5mm central pin. For the whole design please check the original project.