Compact Fursuit Head Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a compact device designed to dry out fursuit heads or other similar masks. The fursuit head fits over the…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a compact device designed to dry out fursuit heads or other similar masks. The fursuit head fits over the supports in the center of the unit and a fan located under the unit circulates air through it. This device has been designed with travel in mind, it can fold up for easy transportation and is designed to be fairly durable.
There is a drilling guide provided in the project files. You can print this out to help locate the mounting holes for the fan. I made this example using a drill and jigsaw, but it could be also fabricated using hand tools if that is all that is available. If you have access to one, a 3 1/2" hole saw would be a very easy way of cutting the hole for the fan.
Materials
- 1/4" or 6mm plywood cut to 9" x 13" (preferably two sides good furniture ply)
- 92mm fan of your choosing (I'd recommend a computer case fan)
- M4 screws appropriate for your fan
- (Optional) Fan grill for the underside of your fan
- 4x 1/4" x 1 1/2 Clevis pins (recommended) OR 4x 1/4" x 1 1/2 bolts OR 4x M6 bolts
- Nuts / R pins for the above
- Wood screws appropriate for the legs (~3mm minor dia) x 1/2"
Category: Household