Pulley Kit (608 bearing and M7 bolt Compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Pulley System to accept 608 bearings and utilize a standard M7 Bolt for strength and ease of assembly for all.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pulley system reworked to allow a 608 bearing utilizing a M7 bolt or pencil to allow secure and tight fit to the bearing inside. Can use metal or 3dprinted bearings depending on intended load.
Be careful to use orientation of print to your advantage here, shear forces are weaker on layer-lines!
USE these bolts: https://www.printables.com/model/1213096-m7-hex-bolts-w-accessories
Great method to teach children hands on, or have fun around the house. Using a 10lb medicine ball without issue, printed pin in PLA PRO for stiffness. single pully in Fast PLA, double in Pro PLA.
If my work has helped, please consider buying a coffee :) www.buymeacoffee.com/will_smith