SV08 purge bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
purge_bucket
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 201
- Wydruki
- 3
- Wyświetlenia
- 2020
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this is heavily inspired by https://www.printables.com/model/957985-voron-24-bamboo-a1-brush-bucket
this purge bucket has be designed for use with the sv08. the file needs to be modified so that your nozzle rest to the left/center of the wiper. this should be compatible with all tool heads that are out there for the SV08.
this uses 12mm M3 screws and should have room for heat inert wherever you would like them. i suggest PETG for the bucket. may also be ok for the arm and mount but it is close to the Z stepper. use an a1 mini silicone wiper
adding foil tap really helps a lot.
make sure to update this section and update file from .txt to .cfg
