Ender 5 Max Simply Hexed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom fan shroud for the Ender 5 Max, allowing for a Cartographer to be mounted
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 479
- Wydruki
- 2
- Wyświetlenia
- 2658
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This fan shroud is for use with the Ender 5 Max only, and for use with the Simple AF custom firmware and a Cartographer or Beacon eddy current probe
This model should be printed in ABS/ASA for the best results
Changelog
23/04/2025: Added .f3d file
Printing Instructions
- No supports
- 0.2mm layer height
- Forced 0.4mm lines
- Set “Slice gap closing radius” to 0 under “Precision”
- Disable “Only one wall on top surfaces” under “Walls and Surfaces” in Orca Slicer!
Required Extra Hardware
If you are mounting a Cartographer or Beacon probe, you will need:
2x Voron M3x5x4 heatset inserts (M3 x 5mm OD x 4mm L )
Everything else uses either the stock parts or parts that come with the Cartographer.
Assembly
- Remove the stock fan and fan duct from the original fan shroud
- Insert the fan duct, then fan shroud into the Simply Hexed shroud
- Screw in the fan. The pressure from the fan will hold the duct in place
- Insert the heat-set inserts into the bottom of the Simple Hexed shroud
- Screw in the Cartographer or Beacon into the heat-set inserts using the screws that come with the probe
Then, visit the SimpleAF discord for help with firmware install: https://discord.gg/tGGVn5qjgv
Pre-rooted firmware for those who prefer to roll their own solution:
https://github.com/zevaryx/ender-5-max-firmware
Thanks to @tbkMaker for helping me learn how to model this, as well as providing the renders