1 / 2
Chair and Furniture Feet — zdjęcie 1
1 / 2

Chair and Furniture Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foot for wooden furniture or chairs with 24 mm diameter and 6,3 mm height

Ocena
5 / 5
Polubienia
86
Pobrania
693
Wydruki
10
Wyświetlenia
2818
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Share Alike

Enables easy movement of heavy furniture and protects hard floor from scratches.

Countersunk hole is designed to house the head of a 4mm wood screw. The top of the screw head sits ~2mm below the surface so it can't touch the floor. 

On sensitive floors a round felt pad can be glued to the top after tightening the screw. It is not recommended to use the plastic foot directly on wooden floors. 

Printed with 3 perimeters for a small chair, up to 6 Perimeters used for a heavy cupboard. PLA was used for the prototypes and worked well on tiles, although a softer material is recommended. You can choose suitable print settings and material for your application.

 

Tagi