Parametric lithophane frame for aliexpress disk lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
frame for lithophane picture at a size of 150mm by 115mm and 4 mm thik. disc lamp slides in, block ensure whit light
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
A frame for a lithophane image, measuring 150 mm x 115 mm and 4 mm thick.
I attached the fusion 360 file so you can change parameters.
The disk lamp slides in through the opening at the top of the frame and remains exactly in the middle of the frame.
It is best to print the frame on its back and allow support on the build plate only for the lamp insertion opening.
The light blocker ensures white even light as the lamp may reflect several colors if pointed directly at the lithophane, the light blocker is designed to prevent this. The light blocker should be printed from lithophane or another white filament and it is best to stop printing at the end of the first layer because this is how the best results are obtained. Print and make sure it comes off without wrinkles.
Attach the light blocker using a few drops of super glue to the edge of the lamp slot.
attach the lithophane picture to the frame by pushing it until it's in.