1 / 10
Jigsaw case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for my jigsaw, so I used parametric tool box, resized and added mounts
mountns can be used as a saw storage.
to mount everything you'll need M3x30mm, to mount handle you'll need 2xM3x55mm (or 50)
I splitted model in slicer to fit my bed and then glued with epoxy glue.
since model is big I got some warping which will be fixing with melted PLA and sandding.
planning to paint it once sanding is done. So I recommend adding as much brim on sharp corners as you possibly can to prevent warping
Printed with PLA 0.4 nozzle.
no supports needed