1 / 3
Power supply cover (PSU) 8010 fan for Neptune 4 Plus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cover for installing the 8010 fan at 24V
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The fan does not have a speed control, so the 3296W 500 ohm tuning resistor is also mounted. It is enough to reduce the speed by 50%. Just insert and move it up.
M3 threaded inserts with a length of 3 mm were used for fixing in the power supply.