Sneezing man spray cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cap for your spray cans in the shape of a sneezing man with three openings.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cap for your spray cans in the shape of a sneezing man with three openings (mouth and the two nostrils).
I tested it and it works.
This is a female cap. You can use it with male cans or you can put an adapter tubing in there. I used a PTFE tube common in 3d printing for 1,75mm filament. At the end of the tube on the side of the can, there needs to be a little rectangular cut so that the liquid of the can come out.
The model was created with FreeCAD (realthunders branch - Version: 2024.1006.0.14555 AppImage )
If you want to use the FreeCAD .FCStd file, please recompute the last feature to make the model visible. The cache of the file was cleaned to save space.
For this i used this freecad_cache_remover. This reduced the size from 80MB to 12MB.