Small doll bed - princess edition (75x50mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because every Little Princess requires four-poster bed!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Small doll bed to be printed and glued together.
While even 0.6 nozzle may be assembled, .25 one gives best results :) Little support needed in the corners. Remove “elephant foot” before assembly (otherwise parts won't fit together).
Footprint is 75x50mm, there is frame to mount some fabric on top to make it prettier (and looking like real princess bed!), as well as space for mattress and bedding inside (no pea included).
Blue printed model has sides ("Boczki") swapped - usually longer high part is on the “head” side of the bed. New one is on the way, so If I remember to make photographs, I will replace images. I've included assembly image for reference. Nozzle 0.25, DevilDesign PLA.
Grey printed model - “proof print” with sides mounted correctly, as clearly seen, 0.6 nozzle made model a bit less tightly fitted.