Filament Sensor Funnel (Insertion Guide) for the Prusa Festo Fitting M5-4 Flex Filament Sensor Bypass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel shaped filament insertion guide for PTFE tubes which can be screwed in to M5 brass heat set inserts
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked DJG3's Filament Sensor Funnel remix of Surfalex2000's Filament insertion guide as a way aid in directly feeding TPU filament but I did not have any PC4-M6 fittings for the back end for my PTFE tubing. But I did have some Prusa Festo M5-4 fittings that I had bought as eventual possible replacement parts that I could use instead.
I changed the screw threads to fit M5 fittings. After printing it in PETG, I used piano wire to clean out the hole so the filament would got in smoothly.
Hardware and Materials:
(3) or (6) Festo M5-4 fittings