Qidi X-Plus Piggyback Large Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this spool holder to be able to mount large (300mm) spools to the X-Plus, as the spool holder rods dont't extend…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 791
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Made this spool holder to be able to mount large (300mm) spools to the X-Plus, as the spool holder rods dont't extend long enough to properly support those.
May not be the smartest solution, but works for me. Be careful with spools that are fully wound, as with rapid print head moves, the filament still can become unwound and tangle up...
I attached the step files, so you can maybe change hole diameters or lengths. I had to slightly rework the holes for the ends of the Qidi-Spool-holder-Rod.
Print Settings
Printer:
Qidi X-Plus
Rafts:
No
No
Resolution:
0.4
15%
Filament: 3DJake EcoPLA Matt Grey
Notes:
Printed with 0,6mm Nozzle. Don't print too fast, to avoid curling and warping of bridging sections.
Category: 3D Printer Accessories