Fencing Tang for Incredibly Short Fencing Epee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very short, functional tang that emulates an epee weapon
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
The shortest possible tang for a fencing epee, designed to be used with an existing tip, wire, guard, bodycord socket, grip, and hex nut.
Print the unthreaded version if you would rather use a die to cut the threads yourself.
I found the most success printing PETG or ABS.
If you would like to not waste a wire on this project, I also have a 3d-printable tip insert on my profile: https://www.printables.com/model/1210535-epee-wire-tip-insert
I put conductive copper tape over the small piece of plastic extending from the bell guard to allow contacts on that part of the "blade" to ground.
