1 / 2
Marci's Mount for Hadley Telescope: Improved tube holders
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tube holder without heat-set inserts.
- Ocena
- 4,5 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 2
- Wyświetlenia
- 210
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (11)Powiązane
This model doesn't use heat set inserts, but just M4 nuts (and bolts).
Works with 12mm tubes.
Print the part with the inserted nut standing upright, so the layers don't crack when tensioning the screw. (Put the side where the tube enters down on the bed)
