Tall Toothbrush Cup w/ Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute little toothbrush cup with drain and drip tray for tight spaces!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found myself needing a new home for my toothbrushes and the space I had going spare was a bit skinny and without a ton of room for something low and wide. So I designed this little toothbrush holder cup with a drain in the bottom and bonus drip tray in case you don't have it on a sink or other wet place. Far too many toothbrush holders I've owned got really gunked up from moisture and water over time, so I figured this design should help keep everything in tip top shape!
I designed it in multiple pieces both for ease of printing and to allow for easy multicolour prints like mine is here! Everything should print without supports as the angles were calculated in such a way to allow for support free printing! If your printer struggles with overhangs, I recommend a lower layer height around those areas. The drip tray is not required if you keep this on a sink or in a shower, however if you don't, it'll keep excess water from your counter!
The lid should be a snug fit so it doesn't come loose easily. If your printer doesn't do well with tight tolerances, you can use the XY Compensation option in PrusaSlicer to increase the spacing between the lid and the body.
My print was made with Polymaker PolyTerra filament!